Scrappy Trip in Love

Finished another one of my First Quarter Hopefuls!

Last winter I made three (!) Scrappy Trips quilt tops as part of the mania that was the #scrappytripalong on Instagram. Here’s the first one, and I blogged about it here. The link to the Bonnie Hunter pattern/technique is here, in case you’re interested.

This one was more controlled to be an Irish Chain and less scrappy, since all of the fabrics came from the Amy Butler “Love” line of fabric. I had some yardage of the red dots, so I used that down the diagonal of each block, with Kona Snow on either side of it. The number of strips I had was limited, so I was only able to get a total of 16 complete blocks out of the fabrics that I had.

Scrappy Trip in Love

Then I started playing with potential designs and people voted in their comments on Facebook, Twitter, and Instagram. The design below ended up winning, though I really liked the diagonal rows one a lot and came very close to going with that idea.

IMG_3187 IMG_3188 IMG_3191 IMG_3192

Once the top had been sewn together, the quilt top sat, for pretty much all of last year. I put Kona Snow borders on it at some point, and then layered it to be quilted. And then it sat some more.


But FINALLY, I got the quilting done. I did the quilting while trying to figure out exactly what the thread breakage issue was with my quilting machine. I chose to quilt spiraling flowers into this quilt, and it helped me be able to tell the repairman that if I sewed upwards and to the left, the thread broke every time unless I stitched so slowly that it was difficult to control the curves. In spite of that challenge, I did finish quilting the entire center of the quilt before taking the machine in for repairs. I decided that I would do the borders after the machine was less moody, so I would have to stop and bury threads every few minutes (and so my children would stop learning new words as I shrieked my frustration).



It took three weeks to get my machine back — snow days, a conference that the repairman went to in the middle of everything, and waiting for a new foot pedal because the old one was shorting in addition to the timing problem I was having with the needle… And I celebrated by doing feathers in the border. I love quilting feathers. I puffy heart love quilting feathers. Seriously. Favorite thing ever. I recognize that building my skill base is necessary, so I don’t ALWAYS quilt feathers, but I kinda would like to. If it weren’t weird.


And then I pledged to sew the binding on the next day.


Didn’t happen. I got distracted by “Entropy.” And then “Fibonacci Squared,” which is also almost finished and I’ll post about it in the next day or two.

But I did finally finish the “Scrappy Trip in Love,” and I did the usual photo session on the fence yesterday, and posted a pic of it on Facebook with the notice that I’d sell it to anyone that might be interested — and it sold within two minutes. SO. Yay!

IMG_6403 IMG_6413


IMG_6407 IMG_6409 IMG_6406

The buyer will pick it up on Saturday morning, and I’m very excited! It’s the second quilt I’ve sold to her (the first was the Cross quilt in this post), so that’s awesome! She gave that one to friends as a wedding gift, but this one she intends to keep. I’m happy.


“Scrappy Trip in Love,” made by Elaine Wick Poplin. Finished in March, 2014.



Sometime last year, I made a very impulsive purchase of some fabrics for which I had to pay international shipping… These Oakshott Cottons had been popping up in projects on Instagram, mostly by quilters in the UK that I follow with puppy dog-like admiration, and I just had to have them. When the Lipari collection came out and Easter had come and gone (so my fabric fast was over) I was no longer able to resist the temptation, and these found their way to me. I bought a fat quarter pack, which really isn’t as much fabric as one would think, so I had to find a way to use every. last. bit. of the fabrics in a quilt to justify the expense in getting them here.

Lipari Fat Quarters

I liked them with steel gray, with charcoal gray, and with black. I tried matching them with other fabrics but they didn’t seem to sing as strongly when put with prints, so I decided to keep them in their purest form and just use them together with a small accent of solids.

I was also very much inspired by this quilt by Charlotte Narunsky, the wee pixie on Flickr. Go ahead and click the link; I’ll wait.

Wasn’t it amazing?!

I decided that to do something like that with the Lipari fabrics would showcase them beautifully.

At a retreat in September, I cut them into squares. With the light coming in sideways from the window, I got the best picture I’ve ever seen that shows the shimmer of these unique fabrics.

Squares Stacked Up

They’re woven with color in one direction and black in the other, much like sari silks are woven. Because of this weaving process, they are slightly iridescent. They also are very fine in weight, so they fray a lot so I wanted to handle the fabrics as little as possible during the design process.

I started by tossing the smallest squares up on the wall and just arranging them in a very mathematically-organized color flow (of course I did).


I built half-square triangles from the other-sized squares, pairing colors in a very systematic way through the stack. The medium-sized squares had four sets of HSTs with their neighboring colors, 3 with the the colors two steps away, 2 with the colors three steps away, and 1 with the colors four steps away, and so on. The larger squares only went three steps away because I didn’t have as many of them to distribute, but again the matching was very systematic so that I’d get the best color flow possible. Then I started tossing those up on the wall.

Triangles and Squares

Initially I had wanted to have three sizes of HSTs, but as I got going I realized I’d need to order another whole fat quarter pack of the Lipari fabrics to make enough small HSTs to pull that off. And then the assembly of the quilt top would have been a nightmare with all of the partial-seam construction. So I decided to let the small squares remain as squares rather than making them into HSTs. And I decided to keep the interior all medium HSTs and squares of the same size, so that assembly would be simpler and I might actually finish this project in a reasonable amount of time.

Here are all of the HST units and squares for the center of the quilt.

Center Section

At this point I figured out that I had 357 pieces to work with (squares and HST units), so to use all of them I’d have 17 units by 21 units. Yes, I used all of them, and redistributed the squares accordingly. Then I added the border of the larger HSTs around the edge, trying to repeat the same color scatter as much as I could.

inside and outer border

To get the outer border to fit nicely around the interior of the quilt, I had to add coping strips 1″ above and below the interior, and 1.5″ to the left and right. This made the interior of the quilt a clean 48″x36″ so that my 3″ finished HSTs in the outer border would fit evenly. I chose Kona’s Medium Gray as my inner border, since it framed the Lipari fabrics nicely without competing. Then I began assembling the interior of the quilt.

Assembly begins

As I got going, I would assemble chunks of the top and put them back up on the wall, and after one such chunk-assembly, I had an idle thought… I wonder what would happen if I put this middle section up but rotated it 180 degrees?


I got SO excited at this point, because this simple adjustment gave the piece some tension that it hadn’t had before! So I changed around the outer borders to support it and suddenly loved the quilt.


I had liked it before, but now it had a personality and wasn’t just a color study anymore. And I knew the name in that moment, too — “Entropy,” because I had tried to be so organized and systematic in the process of the layout of the colors, but chaos won out anyway and made it interesting.

And then I got stuck. How in the world was I going to quilt this so that the quilting didn’t compete with the fabrics? I considered feathers, but decided that would pull too much focus. Anything I did would be very visible, since the fabric has a shimmer to it. I decided on straight-line quilting, which I’ve never really done before because, quite frankly, I’m not good at sewing straight lines for more than a few inches at a time. And on my big machine, I’m especially terrible at them. They’re always very…. organic. Organic works for most quilts, but I knew it wouldn’t work for this one.

This poor quilt sat, layered and basted and ready, for a while.

Ready to go

So I kept procrastinating and procrastinating and working on other projects., until I was finally forced to take the big quilting machine in for repairs… It was there for three weeks, having the timing fixed and getting a new foot pedal, so I decided to get out my even-feed foot and try straight-line quilting on my little Janome machine.

First few passes Getting there

I was reminded why I had wanted a larger quilting machine in the first place, as turning the quilt under the tiny harp of the Janome was so painful after a while… My poor shoulders!

with Tucker

But it looked good, so I kept going. I took frequent breaks to admire it and to give my shoulders a rest.

Finally, it was done! I spread it out on the floor and reached for my camera, and Friday showed up out of nowhere.

Friday's quilt

The binding went on — just a simple black binding, since I didn’t want any competition for the center of the quilt.

binding being attached

And the fence photos, of course…

Entropy on the Fence

My assistant, decided to “help” with the photos… So nice of her, no?


After seeing the quilt up on the fence, I have decided that I will quilt down the medium gray borders with simple straight line quilting — vertical lines in the top and bottom borders, and horizontal lines in the side borders… I just have to work up the courage to try that on my big machine. I am NOT willing to do any more quilting on the little Janome — no thanks!

IMG_6221 IMG_6223

But I think the puffy characteristic of the narrow borders pulls focus off of the gorgeous fabrics, and I don’t want that to happen. I’ll add photos once I’ve done that, but it’ll need a pretty substantial lint-rolling before it goes in front of the camera again. This quilt will have to go to Jerry’s office to live because with all the animals here it just gets coated with hair. I bought the fabrics intending to make a quilt for him anyway, so I guess that’s OK, right? I’ll miss it, though — I love this quilt.

“Entropy,” Completed in March, 2014. Finished size: 60.5″x48.5″, including the bound edge.